Engine Valve Seat Finish Grinding Machine
1. Processing range (the original state of the workpiece):
Workpiece status |
Processing conditions |
Remarks |
Valve head diameter |
MAX 50㎜ |
|
Stem diameter |
φ 5~12㎜ |
|
Length |
80~300㎜ |
|
Material quality |
21-4N+4Cr10Si2Mo |
|
Hardness |
30—60HRc |
|
Stem run-out |
Within 0.005 ㎜, the stem part is clean without sundries |
|
Angle |
45~60° |
|
Valve head surface run-out |
0.05㎜ |
|
Machining allowance |
0.10~0.20㎜ (diameter) |
|
2. Processing accuracy and cycle time:
Position |
Accuracy |
Test methods and tools |
Run-out accuracy |
Continuously process and measure 50 pieces within 0.02 mm. |
Special measuring tool |
Dimensional accuracy |
Continuously process and measure 50 pieces within ± 0.01 mm. |
Special measuring tool |
Circularity |
Continuously process and measure 50 pieces within 4.0 μ m. |
Roundness measuring equipment |
Surface roughness |
Continuously process and measure 50 pieces within 0.5 μ m. |
Roughness gauge |
Cycle time |
Take machining allowance 0.2mm as the standard - 8s/pc. |